Member:
IAP
FPN
FPB 
YPG

HOMEPAGE

 

 

Solano Custom Clipless Fountain Pen - in Solid Black Acrylic with Orange Crush Acrylic Accents.

(Click each photo for larger views)

Capped Black-Orange Solano
Uncapped-1 Black-Orange Solano
Closeup-1 Black-Orange Solano Uncapped-2 Black-Orange Solano Closeup-2 Black-Orange Solano

 

Hand-made Nib Hood for #5 Jowo nib.
Solano Nib Hood pic-1
Solano Nib Hood pic-2

 



A
bout the Solano:
This pen was suppose to be a one-time project for a new client. He sent me a photo of the style, picked out the colors and made the decisions on the overall size. But once the project was finished, I liked the pen so much that I ask him if I could add it to my standard line. He approved, so I decided to break away from my usual naming scheme and name this pen in his honor.

Solano Dimensions:
The client had the final call on the dimensions for the Solano, and after a few mockups we had the final overall size and shape nailed down. The pen is nice and hefty, but I think the dimensions are perfect for the large size pen, because it looks unique, but feels perfect. The shape has a nice feel in the hand and the pen is very comfortable to use. It has a capped length of about 6" (152mm), and 5 1/4" uncapped. The maximum diameter is a bit unusual at about .67" (17mm). at the joint, and tapers down to about .35" (9mm) at each end. The key to the design is the shape. It looks simple enough, but was actually very hard to acheive the subtle tapers to get the shape just right. The pen uses a 1" long straight style section with just a slight taper back to front that makes it comfortable to use. The acrylic centerband is about .14" (3.5mm) wide. The client wanted his band on the cap side, but the pen can be ordered with the band on the barrel side.

Whenever I have a new pen project like this that's for a new style, I first like to work out the initial shape and size of the parts using a drafting program. Then once the size and shape is established, but before committing to the final pen with any special ordered materials, I'll next make a solid black mockup pen. The mockup pen allows me to work on the subtle shapes of the parts, before committing to the clients pen. That way I can make any final adjustments that might be needed before making the clients pen. So the black and orange pen shown was the initial mockup pen for this project. I like to use SOLID BLACK acrylic for the mockup pens because it allows me to see the contours of the shape without having any interference from a colored pattern. But this style called for an accent color to be used for the acrylic accent band (on the cap) and section. so I used the bright orange crush so I had a high contrast to easily judge the width of the band. The "London Fog" pen was the material I ultimately used for the clients pen. The gray acrylic has a slight smoky transparency that allows a slight glimpse of the contrasting colored section through the cap while the pen is in the closed position. Look for more colors to come or choose your own custom colors.

This style pen uses a Cartridge/Converter inking system with the larger #6 nib. Nib finishes available for #6 STEEL nibs are: 2-tone, polished steel, and Black Oxide. Current tip sizes are x-fine, fine, medium, broad, 1.1 and 1.5 talics. 14 & 18K Gold nibs are also available as a special order.

Solano Options and Upgrades:
The unique style of this pen stands on it's own, so it requires few upgrades or options. One upgrade that the original client wanted was an accent band behind the section. I've also come up with one other upgrade that could be added--a HOODED nib. I've always been facinated by the Parker® Nib Hoods. After searching for a few years, I finally found a source but after buying a few, I found they were too small for my larger pens. So I decided to see if I could come up with my own. After some trial and error, I can up with a hooded nib I could use wit a standard #5 JoWo, and it looks perfect on the Solano (see the Black & Orange pen page).

I also offer a variety of hand-made Pen Props and Pen Buttons. You can order a Pen Prop in a material to match your pen, or any one of the wooden styles made in a variety of stained or dyed colors. The Pen Buttons are available for any of the clipless pens.



About this Pen:

This material is an Acrylic Acetate called "______". As you can see, it's so called because of the color and pattern. The pattern is called CRUSH because it's made up of small "crushed" pieces of acrylic. It's made by first making a batch of solid orange acrylic, then it's crushed up before putting back into a mold. Once the crushed pieces are placed in the mold, it's filled again with the solid orange. Once it cures, you have a solid piece of material with the crushed pattern. It creates a very vibrant color, so it's a very popular pattern. You'll see several other colors used on my pens (the Cranberry Red, and Sapphire Blue are two).

About this Material:
This black and orange pen was my initial mockup pen for the London Fog acrylic project. That pen was a custom order from a new client, and whenever I have a new style pen to make, I like to make a solid black mockup first so I can make any adjustments before comitting to the special ordered material. The solid black is best for the mockups because it allows the contours of the shape to stand out without having any interference from a colored pattern.

Pen Specifications:
Material/Color:

Main: Solid Black Acrylic.
Accent: Orange Crush Acrylic.
Length - Capped = 6" / Uncapped = 5.28".
Diameter (center) = .67".
Nib - #6 Polished Steel Meister.
Ink system available: c/c only.